SafGuard Snap Tester,Button Pull Tester

SafGuard Snap Tester,Button Pull Tester

Model No.︰TN11298-B

Brand Name︰TONNY

Country of Origin︰China

Unit Price︰US $ 1300 / set

Minimum Order︰1 set

Inquire Now

Product Description

TN11298-B  SafGuard Snap Tester

 

INTRODUCTION

1.To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a stand.

The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.Capability can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars,and D-Rings,amongst others.
2.The detachment of a snap or other parts may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipments may be recommended, such as :
TN2008  Sharp Point Tester
TN2018  Sharp Edge Tester
TN11308  Button Impact Tester

TECHNICAL PARAMETERS

1.TONNY Dimension : 28×23×73 cm
2.Gross weight : 30 kg

STANDARDS

GB 6675,16 CFR 1500,ASTM D7142-2,ASTM F963,EN 71 Part1,CPSC,ISO 8124,M&S P115A,etc
ORDERING INFOMATION

Code No.

Description

Configured☑ / Optional□

Photo

11298-B-1

The Base :

used to install the tension gauge, fixture and fixed sample and test operation.

☑ 

 

TN2418

30 kg Imada Force Gauge FB-30K : display the reading of pulling force.

☑ 

 

11298-2

Calibration Weight(15 LB) :

routine checking the accuracy of Imada Force Gauge.

☑ 

 

11298-B-3

Lower Fabric Clamp,Level Arm Locking :

fix the fabric specimen with buttons firmly,flatly & constantly so that the fabric slippage can be minimized.

☑ 

 

TN2408-2

Upper Long Nose Vise Grip:

mainly used for trouser hooks and other smaller accessories.

☑ 

 

TN2408-6

Upper Three Pronged Grip :

can adjust Jaw size, suitable for different sizes of buttons decorations.

Generally used for testing four-hole buttons & jeans. 

 

 

TN2408-11

Upper Grasp Button Grip :

designed to grip the grasp button or larger buttons,e.g. Jeans button or plastic buttons up to 30 ligne.

☑ 

 

TN2408-7

Upper Snap Grip :

testing concave buttons with five claws.

☑ 

 

TN2408-8

Upper Stud Grip :

testing the convex button with five claws.

 

☑ 

 

TN2078-B

Transparent Small Parts Cylinder :

to test whether the garment accessories are classified “Small Part” or not in accordance with EN 71,CPSC,ASTM F963

,ISO 8124 etc.

☑ 

 

TN2408-5

Upper Two Pronged Grip :

can adjust Jaw size, suitable for different sizes of buttons decorations.

 

TN2408-1

Seam Tension Grip :

testing the seam `s pulling force.

 

TN11298-4

Zipper Test Kit :

to test for the zipper stops & D-rings.

 

 

Our products are all certified by international authority,national metrolog inspection center, won praise from customers all over the world ,including SGS,ITS,BV,TUV Sud,TUV Rheinland,CTI,etc

 

NEW TOTAL SOLUTIONS

HONOR AND CERTIFICATES

STANDARD PACKING

MULTIPLE TRANSPORTATION

 

Shipping

Payment Terms︰ T/T

Product Image